Silicone Vacuum Bag for EVA Glass Laminating Furnace Oven

Silicone Vacuum Bag for EVA Glass Laminating Furnace Oven

Each set of integrity silicon blanket consists of one top and one bottom silicone sheets. The four
top and bottom sheet edges are sophisticatedly embedded to each other, to make sealed room for vacuuming. Interlocking of edges and corners are easy. Edges and corners are specially modified , such as locking strength grows larger when vacuum pressure becomes higher. Although it is tightly sealed, edges unlocking and opening are amusingly easy when vacuuming stops.

Silicone Blanket Data sheet
Hardness
55±5(Shore A)
Tensile Strength
≥11.2 Mpa
Tearing Strength ≥38N/mm
Long Run Temperature 250℃
EVA Resistance Strong
Normal Using Life >3000 cycles
Appearance One side smooth and one side cloth
Remarks Maximum width: 4000mm without joint, the world’s first

Product features: heat-resistant, high elasticity, special surface property (no adhesion) and
physiological inertia, oil resistant, solvent resistant, anti-aging, anti-corrosive, and non-polluting.,EVA resistance.

Tensile Strength
Top silicone blanket is more flexible. When vacuum is turn on, air in between top and bottom silicon sheets starts to evacuate. Top silicone blanket begins to wrap downwards along glass edges until it gets in physically zero-gap contact with bottom silicone sheet. No air or gap is allowed in between the two silicone blanket. This specially formulated silicon blanket is highly elastic. It provides enough flexibility, allowing the blanket to stretch until it fully wraps along glass edges. This remarkable property is especially important when glass is thick and/or curve.

Heat Resistance
Silicone sheet resists high temperature(more than 250C). Uniform Heating is applied on silicon blanket and glass all the time until interlayers, for example, EVA film is melted thoroughly. High temperature resistance is one of the important criteria of silicone vacuum blanket.

Thermal Stability
After heating is completed, forced cooling is started. Silicon is thermally stable for numerous rise and fall of temperature.

Silicon blanket is tough. It allows glass loadings and unloading for numerously times. It resists abrasion, wear and tear up to a certain high degree. But to protect the silicone vacuum bag, it’s better you edging the glass before laminating.
While the blanket is strong, the blanket is also soft enough for easy handling when top blanket is
opened and closed during glass loading and unloading.

Thanks to special formula, silicon blanket is deterioration proof. Its properties
retain unchanged.
When the blanket is always kept clean, handled properly and glass edge is polished, the
blanket is long lasting.
Silicon Tube of highly flexible silicon tube is provided. It connects from silicon blanket to
vacuum system. Air in between top and bottom sheets is evacuated through this silicon tube to vacuum system. 4 meter of silicone tube will be provided with each vacuum hose.

If you need more EVA laminating accessories, please contact us: EVA THERMAL CUTTER,
SILICONE VACUUM BAG,
LIGHT MEASURING EQUIPMENT,
GREEN RIBBON TAPE

All rights reserved by
UCOLIN GLAZING SUPPORT
GUANGDONG,CHINA
WWW.UCOLIN.COM
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

CNCGLASS